TA-TC 21 radiator pressure valve

For all cars made after 1945
RichardWallach
Posts: 376
Joined: Mon May 21, 2012 10:14 am
Name: Richard Wallach
Location: Melbourne, Australia

TA-TC 21 radiator pressure valve

Postby RichardWallach » Fri Jun 05, 2015 11:44 pm

I am trying to ascertain whether Alvis had the spring loaded valve sitting on a rubber or fibre washer. RT believe that it may have been a fibre washer. Any comments as to what works best would also be appreciated.

Richard
Melbourne

lacey giles
Posts: 38
Joined: Mon May 21, 2012 10:55 am
Name: Giles Lacey

Re: TA-TC 21 radiator pressure valve

Postby lacey giles » Tue Jun 09, 2015 10:38 am

Mine had a very perished / crumbling rubber washer that I believe was original. It certainly did not work.

The rest of the valve was totally corroded and stuck fully open.

I made one good valve up out of 2 (rubber washer was missing though).

I found a fibre washer that would fit and used that and it has been fine now for a couple of years.

Giles Lacey

Nigel Griffiths
Posts: 7
Joined: Mon Jun 10, 2013 3:03 pm
Name: Nigel Griffiths

Re: TA-TC 21 radiator pressure valve

Postby Nigel Griffiths » Wed Sep 16, 2015 8:46 am

Perhaps late in the day, but my TC21/100 pressure release valve sits on the top of the radiator with NO washer whatsoever. I have been having problems with the coolant leaking out when the engine has stopped running. The problem was not the lack of a washer, but the fact that I had got the brass pressure relief valve in upside down. I returned from Goodwood revival on Saturday in the heat of the afternoon, and the next day checked the fluid level. Perfect.


Return to “Post War Cars”

Who is online

Users browsing this forum: No registered users and 1 guest