TD21 Front Suspension Query

For all cars made after 1945
Peter Martin
Posts: 165
Joined: Tue May 22, 2012 5:26 pm
Name: Peter Martin

Re: TD21 Front Suspension Query

Postby Peter Martin » Mon Sep 04, 2017 9:46 pm


1 I think I read somewhere that the complicated threaded design was to maximise the contact area between the suspension pin and the trunnion sleeve and thus reduce load /wear on the bearing surfaces.I have seen some very badly worn ones probably due to lack of regular greasing.
2 Set up position is restricted by the flats in the suspension pin and the cotter pins that lock it in position.


Return to “Post War Cars”

Who is online

Users browsing this forum: No registered users and 2 guests